Reasons to choose a Glosser Precrusher

  1. Money Saving on Hauling Costs
    Because the trash is crushed in the outer chamber before being inserted into the receiving container, a higher density is achieved - so, from 2 to 4 times the trash weight is hauled with each load.

    Hauling costs in most urban areas average $300 per load - therefore, if twice the weight is hauled per pull the cost per ton is at least half - sometimes less - than with a standard compactor.

    EXAMPLE: If a location now produces two loads per week with a standard compactor at $300/load hauling cost, the Glosser Precrusher will reduce this cost item by $300 per week or $15,600 per year! Some users of Glosser Precrushers report hauling savings of $25,000 per year! 

        Enter the number of loads per week:  
     Enter the hauling charge per load: $

         Your potential annual savings: $

  2. Increased Availability
    Since the receiving container is not out of service as often - there is less interruption of the availability of the compactor for trash loading.

  3. Crushing Efficiency
    Bulky items, such as steel buckets and drums, wood crates, and pallets, etc. are precrushed effectively - for both hauling and landfilling advantages

  4. Product Destruction
    Some users have found that precrushing discourages theft of merchandise inventory by way of the landfill.

  5. Durability
    Glosser Precrushers are constructed with heavy steel plates and other components to withstand the large precrushing forces encountered in this service.

  6. Simplified Controls
    Glosser Precrushers use a unique proprietary electronic control system which permits the user to select from one to three precrush strokes. Also, this controller eliminates the need for pressure switches (often a source of trouble in trash compactors).

  7. Long Lasting
    Glosser uses the premium Sherwin Williams Corrosion control system that ensures added years of service from corrosion and chemical attack in aggressive environments. Our products are primed with KEM-FLASH ULTRA-BOND and finished with QUICK DRY 350 ENAMEL.

Copyright 2005